Portable Air Quality Monitor Video
Request Quote
Aeroqual Ranger™ | Dust is a real-time, active-sampling monitor that provides simultaneous measurements of multiple particle fractions (PM1, PM2.5, PM4, PM10, TSP) and temperature and relative humidity, in a connected, lightweight handheld solution with Cloud-based data visualizations. It is rugged and easy to use, featuring a long-life lithium battery and a lightweight, ergonomic design. Ranger Dust lets you see what's happening at the job site, even when you're not there, cutting down on site visits. All logged data is backed up on Ranger Cloud, in real-time, wherever Wi-Fi is available. Sign up to receive automatic alerts and minimize data loss.
What is included:
The Ranger is also compatible with all Aeroqual type 1 sensors making it suitable for diverse projects with support for 28 gas sensor heads and 15 gases (sensor heads available separately).
Ranger Specification Sheet
Sensor Options
Learn more...
The Series 500 enables accurate real-time surveying of common indoor air pollutants, all in an ultra portable handheld indoor air quality monitor. Data is stored on board the Series 500 with a maximum 8,188 records available. To download the data a USB cable is supplied for connection to PC. Free PC software provided with the Series 500 takes the data and presents it in a chart or table view. Data can be downloaded and viewed in Excel.
The monitor can also operate in control mode. Upper and lower control limits can be easily set directly on the display. Using the 0-5V output the Series 500 can be used to switch on/off an externally connected device, such as an ozone generator, or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the Series 500 is effectively able to act as a fixed monitor as well as a handheld portable device.
Other features on the Series 500 include monitor ID and location ID. Monitor ID identifies the monitor uniquely and ensures that all data from it are tied to that monitor. Location ID can be used to tag measurements to a specific location which is helpful when sampling at a number of sites over the course of a day or week.
Series 500 Brochure
The Series 300 monitor is a versatile gas monitor with the ability to accurately measure a range of gases at different concentrations. The monitor can be fitted with any of the sensor heads listed on the Sensors tab. Sensor heads can be swapped quickly and easily, allowing one monitor to measure many different gases. It can also be configured to measure temperature and relative humidity by selecting the optional plug-in sensor.
Measured gases are displayed in ppm or mg/m3 on the large LCD display. The user is able to set and adjust low and high level alarms which trigger an audible alarm when the setpoint is reached. The user is also alerted by flashing arrows on the display.
A key feature of the Series 300 is the ability to operate in control mode. Using the 0-5V output the unit can be used to switch on/off an externally connected device or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the series 300 is effectively able to act as a fixed monitor as well as a handheld portable device.
Series 300 Brochure